Sealing machine is a very common equipment in the food industry, most people still do not understand, then introduce to you how to use the sealing machine.
1. Open the "POWER SW." On the rear panel of the chassis, press the "SWITCHING" button on the panel, and wait for the "WARM UP" green indicator to light up, and the machine can work.
2. Insert the plug on the handheld sensor head into the socket on the panel and tighten. Pay attention to the positioning gap
3. Place the sensor head on the container lid and press the start button on the handle. At this time, the "HEATING" red indicator light is on, indicating that the heating is in progress. Do not remove the sensor head. The "HEATING" red indicator light After extinguishing, remove the sensor head, and wait for the green indicator of "WARM UP" to light up or the short beep of "buzzer" in the machine to start the next container sealing operation.
4. Choose a flat table, put the CAN VACUUM SEAMING MACHINE steady, you can pull the chassis feet apart to make the machine panel easy to observe.
5. Hold down the "SETTING BUTTON" button and set it to an appropriate value, generally between 0.5-2.0 seconds.
6. Insert one end of the power cord plug into the socket on the rear panel of the chassis and the other end into the power supply socket. Please use a single-phase three-wire power supply.