How to clean essential oil filling machine
Essential oil filling machine is used to fill all kinds of liquids, including all kinds of beverages, medicines, etc. Because the filling is liquid, the container of the liquid filling machine must be kept clean. The filling container used must be strictly inspected and cleaned to prevent the beverage after filling from being contaminated.
In addition to the cleaning of the filling machine, automatic can seamer it is also necessary to keep the filling workshop clean and tidy. Because the production line cannot run normally due to the quality problems of the filling machine itself during the production process, it is necessary to pay attention to sterilization when using the essential oil filling machine to ensure clean and low-temperature filling.
The main methods to ensure cleanliness are: 1. Keep the pipes of the liquid filling machine clean. All pipes, especially those in direct or direct contact with materials, should be kept clean. They should be scrubbed every week, water taken every day, and sterilized each time. ; Ensure that the filling machine is clean, and the material tank must be brushed and sterilized to ensure that there is no dirt and bacteria in the part that contacts the material. 2. It is the best method to ensure the biological stability of bottled beverages during the production process. The sterilization time and temperature must be controlled to ensure the final effect. It is also necessary to avoid excessive sterilization time or high temperature. Beverage is oxidized, and after sterilization, it should be cooled as soon as possible so that the temperature does not exceed 35°C. Low temperature filling is the lowest requirement for beverage filling. Generally, beverages are not prone to product foam in a low temperature environment, which is beneficial to filling. Before the filling machine works each time, use 0～1℃ water to reduce the temperature of the filling machine tank and the conveying pipeline. When the filling temperature exceeds 4℃, the temperature should be lowered first before the filling operation. Use the heat preservation tank and constant temperature filling to keep the material at a certain constant temperature within the specified time for filling, so as to avoid the unstable operation of the filling machine due to excessive temperature changes. In addition, the filling equipment should be isolated from other equipment at best. The lubrication part of the filling and sealing machine and the filling material part should be prevented from cross-contamination, and the conveyor belt should be lubricated with special soapy water or lubricating oil.