What faults are prone to long-term use of can sealing machine
The can sealing machine is composed of electric motor, pulley, main shaft, locking pad, column, lifting table, right roller, concave wheel shaft and cam, gear box, gear frame, etc. Today, let us understand the two major faults, cleaning and selection elements of the can seaming machine!
Two major failures prone to long-term use of can filling and seaming machine
1. Irregular marks appear at the sealing area. This is a common fault because there are a lot of irregular bump marks on the cold press machine; as time accumulates, the dust absorbed by the can sealing machine when it works Other substances will stick to the can seaming machine, making it unevenly heated, resulting in bubbles. The way to deal with this kind of failure is very simple, we only need to clean the can sealing machine regularly or replace the cold press glue machine.
2. For products that are not sealed tightly, air will easily enter it, which will shorten the shelf life of the product and cause losses to the manufacturer. Therefore, the weak sealing is a very important fault of the can sealing machine. However, this situation occurs mostly because the pressure of the cold-pressed rubber wheel is not suitable, the heat-sealing speed is too fast or the temperature is not enough. At this time, it is only necessary to increase the heat-sealing temperature and increase the pressure of the cold-pressed rubber wheel.