What to do if the temperature of the sealing machine is out of control?
Perhaps many people don’t know what is the failure of the sealing machine equipment sealing temperature out of control. To put it simply, the thermometer shows that the temperature is out of control, the temperature cannot be controlled, and the heat sealing temperature is not constant, causing the sealing part to be scorched can filling and seaming machine, or the sealing is not firm or deformed. Wait.
So, what is the cause of this failure? Let the editor analyze one or two for everyone.
There are generally four reasons that cause the sealing temperature of the sealing machine to be out of control:
1. The thermometer is damaged. A new thermometer should be replaced in time.
2. The thermocouple is damaged, and the induction temperature cannot be transmitted to the thermometer normally. Replace with thermocouples of the same model and specifications.
3. The mechanical reason is caused by uneven heat sealing pressure. By adjusting the pressure spring of the heat-sealing knife, the pressure can be consistent.
4. The heat sealing quality of the composite material itself is not good, and the heat sealing coefficient changes, resulting in inconsistent temperatures.
The above are the reasons for the out-of-control sealing temperature of the sealing machine and the corresponding solutions. I hope it will be helpful to everyone.