This machine is suitable for the filling and seaming of carbonated soft drinks, beer, etc. The production capacity is 50-150 cans per minute is the preferred product of a certain size beer beverage factory.
The whole machine can be divided into two positions, filling and seaming, filling is used for pressure filling, liquid level is controlled by liquid level filling principle, and the material temperature is suitable for low-temperature filling. The seal adopts a double - wheel progressive seal.
After the empty cans pass the conveyor and separated by enter-in cans screw, after passing through the pneumatic triplex parts, and the empty can is raised and the conical seal gasket under the filling valve is sealed. The position turning block of the filling valve turns the position and opens the valve under the action of another cylinder. The air is filled into the empty can to form equal pressure. From a large material barrel, the beer passes through 14 small conduits and flows into the empty can. When the liquid level in the empty can blocks the gas return pipe mouth, the filling stops. Under the action of ram, the defoaming valve will slowly discharge the air and pressure. The can supporting cylinder will continue to fall.
After the filling process, the filling barrel spins to the exhaust valve, unload the extra pressure. The can supporting base goes down and separate the can with the filling valve. The can is sent from the filling machine to the cap falling-down device by the hook chain. After the device can detect the can, it falls the cap down and deliver the can to the seaming machine by the drive plate. After it is seamed by the seaming machine, the drive plate will deliver the can to the conveyor.
1.High quality components: We use Siemens PLC, daida inverter, touch screen, Yad solenoid valve and Omron proximity switch.
2.Convenient Operation: The production speed can be adjusted on touch screen; The machine will automatically alarm when normal malfunctions happens, and will also give the corresponding reasons. According to the severity of the malfunctions, PLC will judge whether to stop the machine.
3.The machine has good appearance, stable operation and low noise. It is the ideal filling and seaming equipment in China at present.
Main technical parameters: