This machine is suitable for filling and seaming the can (tinplate) of non-carbonated beverage such as juice, tea, protein drink and canned food, The capacity is 100-600 cans per minute.
The machine is divided into two positions：filling and sealing. The filling part is using the normal pressure filling method. The liquid level is controlled by the liquid level filling principle. Both normal temperature filling and high temperature filling can be adapted. Also, the double - wheel progressive sealing method is used.
The Seaming Principle：
After the empty cans pass the conveyor and separated by enter-in cans screw, it goes into the filling machine with the drive of the dial plate. Can supporting device under the effect of the cam bring the cans open the filling valve so that the beverage from the filling barrel can go into the cans. After the filling process, the cans will be sent to the cap falling-down device by the hook chain. After the cap falling-down device can detect the cans, it falls cap down, and deliver the can to the seaming machine. Then the cans supported by the plate and are sealed. Finally it is delivered by the conveyor.
- The sealing machine head seal uses the biaxial structure: the feed amount of the first and second roller can be adjusted and controlled separately.
- Heavy bearing widely used in this machine; the imported bearings are used in the key heavy loading area so that the service life and stability can be extended.
- High quality components: we use Siemens PLC, daida inverter, touch screen, Yad solenoid valve and Omron proximity switch.
- Convenient Operation: The production speed can be adjusted on touch screen; The machine will automatically alarm when normal malfunctions happens, and will also give the corresponding reasons. According to the severity of the malfunctions, PLC will judge whether to stop the machine.
- Fully automatic cleaning function: the machine can add the following functions according to customers' needs: 1.The filling head can be in the button of the barrel so that no bubble will be generated during the filling process. 2. The cylinder and filling valve can do the CIP automatic cleaning.
- The main rotating body oil lubrication: the equipment's lower head driving parts are soaked in liquid oil, which reduces the wear of parts and accelerates the heat dissipation. The machine upper head parts are installed with automatic oiling pump, which can automatically fill and lubricate the driving parts according to a certain period of time timing and quantitative.
- The machine has good appearance, stable operation and low noise. It is the ideal filling and seaming equipment in China at present.
Main Technical Parameters
|The number of capping head
|The number of filling head
||3650 x2350 x 2100mm